skip to main content

Parts There are 42 products.

Subcategories

  • Model A
    Parts listed here are compatible with Model A Indoor Rowers. Model As were manufactured from 1981–1986.
  • Model B

    Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

  • Model C
    Parts listed here are compatible with Model C Indoor Rowers. Model Cs were manufactured from 1993–2003.
  • Model D, Original
    Parts listed here are compatible with Model D Indoor Rowers manufactured from July 14, 2003–July 21, 2006 (serial numbers 071403–072106).
  • Model D, Updated
    Parts listed here are compatible with Model D Indoor Rowers manufactured from July 31, 2006–present (serial numbers 073106–present).
  • Model E
    Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
  • Dynamic
    Parts listed here are compatible with Dynamic Indoor Rowers (manufactured from November 2010–present).
per page
Showing 26 - 42 of 42 items
  • 2,65 €

    The clear plastic Wind Shield is located on the top of the Dynamic flywheel and designed to deflect air coming from the flywheel away from the rower´s body. All Concept2 Dynamic Indoor Rowers ship with a Wind Shield.

    2,65 €
  • 2,50 €

    For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.

    2,50 €
  • 1,82 €

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    1,82 €
  • 1,25 €

    For use on all Model C, D and E Indoor Rowers. This swivel bushing is installed at the swivel/handle end of the chain to prolong chain life and provide smoother rowing. See more info.

    1,25 €
  • 1,21 €

    For use with Model C and D Indoor Rowers and all SkiErgs Plastic cover for the bearing on the left side of the Model C or D Indoor Rower, opposite the flywheel, and the back side of all SkiErgs.

    1,21 €
  • 1,20 €

    For use with Model C and original Model D Indoor Rowers. Replacement caster wheel located on the front foot of Model C and original Model D Indoor Rowers. Used when picking up the back end of the indoor rower and rolling it like a wheel barrow.

    1,20 €
  • 0,73 €

    For use with Model C, D and E Indoor Rowers. This is the handle hook used on the Models C, D and E Indoor Rower. To store the handle long-term, place the handle up against the flywheel housing. For ease of use before or during a workout, placing the handle in the handle hook puts the handle within easy reach.

    0,73 €
  • 0,67 €

    This is the bolt for the top seat roller for all Model C, D, E and Dynamic Indoor Rowers. Order two per machine. See more info.

    0,67 €
  • 0,67 €

    For use with Concept2 Slides. This is the 31 inch long elastic replacement shock cord (or bungee cord) that keeps the carriage centered on the base. Order two for each slide. 

    0,67 €
  • 0,18 €

    This is the monitor bolt nut for the Model D and E Indoor Rower and all SkiErgs.

    0,18 €
  • 0,12 €

    This is the 1/4-20 Nylock nut that is used with the composite handle that comes standard on the Model D and E Indoor Rowers. The corresponding U-bolt is part number 244. Order two per handle. Also used in various places on the Model C and Dynamic Indoor Rower and all SkiErgs.  See more info.

    0,12 €
  • 0,06 €

    This is the seat screw for use on the Model A, B, C, D, E and Dynamic Indoor Rower. This screw does not require a washer, because it is epoxy patched.

    0,06 €
  • 0,06 €

    This washer is used in various places on the Model A, B, C, D and E Indoor Rowers as well as the gray SkiErg manufactured between July 2009–July 2014.

    0,06 €
  • 0,06 €

    This is the nut used in the travelling pulley on the Model C, D and E Indoor Rower and in the top bracket of the gray SkiErg manfactured between July 2009–July 2014.

    0,06 €
  • 0,06 €

    Used in various places on the Model C, D and E Indoor Rower and the gray SkiErg manfactured between July 2009–July 2014.

    0,06 €
  • 0,06 €

    Used in various places on the Model D, E and Dynamic Indoor Rower and all SkiErgs.

    0,06 €
Showing 26 - 42 of 42 items