No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
General Information (NL)
RowErgs Er zijn 45 producten
Subcategorieën
-
1 670,00 €
ROWERG DYNAMIC
The Dynamic Indoor Rower offers the closest simulation to rowing on the water and was developed to meet the specific training needs of the competitive rowing athlete. Not available to order online. Please call 0115 9340 140 to order.
1 670,00 € -
1 195,00 €
CONCEPT2 ROWERG
The dependable performance of the Concept2 Model D Indoor Rower has made it the best selling indoor rower in the world. Available in black or gray, with Concept2's most advanced Performance Monitor, the PM5. Model D's with PM3 still available, while supplies last. Not available to order online. Please call 877.887.8014 to order.
1 195,00 € -
480,00 €
Slide Pair
Add an on water feel to your Model A, B, C, D or E Indoor Rower with the Concept2 Slide! Note that the length required for a RowErg on a pair of Slides is 11 ft.
480,00 € -
265,00 €
Tall Legs Retrofit Kit
The Tall Legs Retrofit Kit includes a set of front and rear legs that change the seat height of the RowErg from 14 inches (36 cm) to 20 inches (51 cm). This brings the seat to the same height as a RowErg with tall legs or a Concept2 Model E Indoor Rower.
265,00 € -
240,00 €
Slide Single
If you already have a pair of Concept2 Slides and want to be able to link two or more indoor rowers together to simulate a "double" for great team training, you can purchase a spare slide (one slide, as pictured).
240,00 € -
225,00 €
-
114,00 €
Model E Indoor Rower Cover / RowErgs Tall...
Water-resistant covers for Model E Indoor Rowers and also fits on the RowErg with Tall legs.
114,00 € -
87,00 €
-
87,00 €
Dynamic Link
Intended for use with our Dynamic Indoor Rower, the Dynamic Link allows you to connect two or more Dynamic Indoor Rowers so you can train as a crew.
87,00 € -
69,99 €
Garmin HRM-Dual Heart Rate Transmitter
For use with Concept2 PM5s and most PM4s (read below). Garmin Comfort chest belt for displaying heart rate data on the Performance Monitor.
69,99 € -
59,95 €
Polar H9 Heart rate transmitter with belt
For use with the Concept2 PM5, PM4, PM3, PM2+ and PM2 monitors. The Polar H9 Heart Rate Sensor with Soft Strap has Bluetooth® and ANT+ technologies for displaying heart rate data on the Performance Monitor.
59,95 € -
56,00 €
Drive Cord with Barrel—Dynamic
This is the handle drive cord for a Dynamic Indoor Rower. The handle drive cord is a single cord that is connected to the handle on one end and the foot carriage on the other end. Not for use on Model A, B, C, D, or E. See more info.
56,00 € -
55,00 €
-
28,50 €
Power Generator Assembly
For use with Model D and E Indoor Rowers. This is the generator base and coil that transmit flywheel motion to and generates power for the Performance Monitor on your indoor rower. See more info.
28,50 € -
27,00 €
Sensor Coil
For use with Model D and E Indoor Rowers and the SkiErg. This is the sensor coil for the power generator that transmits flywheel motion to and generates power for the Performance Monitor on your indoor rower or SkiErg. See more info.
27,00 € -
25,00 €
Monitor Pickup and Screw Kit—Model C
For use with Model C Indoor Rowers. This is the pickup (sensor) and cable (wire) that transmit flywheel to the Performance Monitor on your indoor rower. If your monitor lights up with zeros but the display does not change when you begin rowing, you may need to replace this part. If the cable or cable housing is cut or broken you will definitely need to...
25,00 € -
21,01 €
Indoor Rower Handle with Grips
Replacement handle for the Model D, E and Dynamic Indoor Rowers. Also retrofitable for Model A, B and C. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.
21,01 € -
21,00 €
-
19,51 €
Seat Top with Screws
For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...
19,51 € -
16,00 €
Flywheel Axle—Model D and E
For use on the Model D and E Indoor Rower, And retrofit for Model C when replacing the sprocket to Pn 1165
16,00 € -
13,50 €
Seat Roller, Top
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
13,50 € -
13,00 €
Shock Cord—Model A, B
For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 9' 8" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
13,00 € -
9,00 €
Damper Replacement Kit
For use with Model C Indoor Rowers. This is the lever and damper (shutter) on the side of the flywheel housing that slides up and down to change the airflow through the flywheel. Less air through the flywheel (setting = 1) means less drag when rowing; more air through the flywheel (setting = 10) means more drag. Fits Model C Indoor Rowers only. See more...
9,00 € -
8,49 €
Shock Cord
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
8,49 € -
7,50 €
14 Tooth Quiet Sprocket—Model D and E
For use on the Model D and E Indoor Rower. This is the 14 tooth sprocket for the flywheel axle. If you need to replace the sprocket, you should you should also order item 7071. PN 7071 is a tool to remove the gear from the flywheel axle. See more info.
7,50 €
