skip to main content
/ //Model B
Model B

Parts listed here are compatible with Model B Indoor Rowers. Model Bs were manufactured from 1986–1993.

Model B Er zijn 9 producten

Toont 1 - 9 van de 9 items
  • 225,00 €

    225,00 €
    Meer
  • 21,01 €

    Replacement handle for the Model D, E and Dynamic Indoor Rowers. Also retrofitable for Model A, B and C. Overmolded grips made of soft rubber won´t absorb sweat, grease or dirt. Does not include U-bolt nuts. See more info.

    21,01 €
    In winkelwagen Meer
  • 19,51 €

    For use on all Concept2 Indoor Rowers. Replacement seat top. 12" wide, 10" deep, 1½" thick, with contours for pelvic bones and tailbone. Mounting screws and lock washers (four each) included. Original equipment on Model C, D, E and Dynamic Indoor Rowers. Can be retrofitted on all Model B and most Model A Indoor Rowers, replacing the original "kidney"...

    19,51 €
    In winkelwagen Meer
  • 13,00 €

    For use with all Model B Indoor Rowers, as well as Model A Indoor Rowers that have been retrofitted with the skewer assembly. This is the 9' 8" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.

    13,00 €
    In winkelwagen Meer
  • 5,00 €

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the right caster wheel.

    5,00 €
    In winkelwagen Meer
  • 5,00 €

    For use with Model A, B, updated D, E, Dynamic Indoor rowers and the black SkiErgs manufactured from August 2014–present. This is the left caster wheel.

    5,00 €
    In winkelwagen Meer
  • 3,30 €

    For use with updated Model D, Model E and Dynamic Indoor Rowers.  Replacement nylon footstrap with buckle, approximately 30" long by 1" wide with a screwhole drilled approximately 9" from the buckle end. Two per machine. Sold individually. Model D/E Flexfoot Assembly Diagram

    3,30 €
    Meer
  • 2,20 €

    For use with Model A, B, C, D, E and Dynamic Indoor Rowers. This is the hard plastic cap that goes on the rear and/or front metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two to four per machine, depending on age and indoor rower model. Sold individually. See more info.

    2,20 €
    In winkelwagen Meer
  • 1,40 €

    For use with the wooden handle on all models of indoor rowers. Connects the handle to the chain. The corresponding nuts are part number 240 for a Model A, B or C and part number 1235 for Model D and E.

    1,40 €
    In winkelwagen Meer
Toont 1 - 9 van de 9 items