No products
Prices are tax included
Parts listed here are compatible with Model E Indoor Rowers (manufactured from August 2006–present).
Our most advanced Performance Monitor. Features wireless heart rate monitoring, the ability to store workouts to a USB flash drive (sold separately), and is backlit for improved visibility in low light environments. See more info. Important! Be sure to select the correct machine (under "For which machine? Please choose.") when purchasing this part.
Voor de Indoor Rower model D en E. Dit is de sensor die het vliegwiel verbindt met de Performance Monitor op je indoor rower.
For use on all Model D, E, Dynamic Indoor Rowers, SkiErg1s and SkiErg2s. This is the metal perforated part of the flywheel cage that wraps around the circumference of the flywheel. This part includes the connectors, screw and nut. See more info.
Handle voor de Indoor Rower model D, E en Dynamic. Tevens als retrofit beschikbaar voor Model A,B en C. Deze zacht rubber handle neemt geen zweet, vet of vuil op.Kijk bij meer informatie
Alle type Indoor Rowers. Voor vervanging van de bovenkant van het bankje inclusief de 4 schroeven. Kijk bij meer informatie
Vliegwiel as Model D en E. Tevens retrofit voor Model C in combinatie met tandwiel Pn 1163, quiet sprocket
For use with Model C, D, E and Dynamic Indoor Rowers. One of the 3-1/4 inch wide top seat rollers (two per machine; sold individually) that runs on the stainless steel track on the monorail. Mounting hardware that holds the roller on the seat frame is not included, because it can usually be re-used. If you need the hardware, order part number 1728...
For use with Model C, D and E Indoor Rowers. This is the 12´ 6" long elastic shock cord (or bungee cord) that recoils the chain on recovery. If your chain recoils slowly—or not at all—between strokes, then you should inspect your existing shock cord. See more info.
Voor gebruik op de Model C, D en E Indoor Rower. Dit 14-tands tandwiel is voor op de as van het vliegwiel. Wil je het tandwiel vervangen dan kan je beter ook artikel 220 bij bestellen. PN220 is gereedschap om het tandwiel van de vliegwiel as te halen.
Flexfoot voor Indoor Rower model D2, E en Dynamic. Past ook op model C en D1.De kleur is donkergrijs van kleur (voor de zwarte bestel PN 1017)De flexfoot grijs past op de voetplaat (Artikelnummer 1054 en 1055, deze worden apart verkocht). Handleidingen: Vervangen Voetplaat/Flexfoot
For use with Model A, B, updated D and E Indoor rowers. This is the right caster wheel for the front foot.
For use with Model A, B, updated D and E Indoor Rowers. This is the left caster wheel for the front foot.
Flexfoothouder, links, met 6 schroefgaten (voor 7 gaten kies PN 2016), voor Indoor Rower model D2, E en Dynamic De flexfoot (PN 1063) past in deze Flexfoothouder voor een complete voetenbord montage. Handleiding: Vervangen Felxfoothouder/Flexfoot
Flexfoothouder rechts met 6 schroefgaten (voor 7 gaten kies PN 2015), voor Indoor Rower model D2, E en Dynamic De flexfoot (PN 1063) past in deze Flexfoothouder voor een complete voetenbord montage. Handleiding: Vervangen Felxfoothouder/Flexfoot
Voor Indoor Rower model C, D, E en Dynamic.De bankrollers (2 stuks per machine) lopen langs de onderkant van de monorail. Materiaal wat nodig is om de bankrollers op zijn plek te houden wordt niet meegeleverd omdat dit makkelijk te hergebruiken is.Heb je dit materiaal wel nodig dan kan je de Bankroller boven compleet bestellen (PN 1733)Kijk bij meer...
Voor Indoor Rower model C, D en E.Vier stuks elastiek roller zitten er in de Indoor Rower. Hierover loopt het elastiek (PN 1731)De elastiek rollers zijn per stuk te koopKijk bij meer informatie
For use with Model A, B, C, D and E Indoor Rowers. This is the hard plastic cap that goes on the rear metal legs of the indoor rower to protect your carpet or floor and keep the machine from sliding back and forth while you row. Two per machine. Sold individually.
For use with Model C, D and E Indoor Rowers. These are the 1¼" diameter urethane pulleys that the chain runs over inside the indoor rower. There are two per machine: one is part of the traveling pulley (part number 1756); the other is mounted on a stationary axle and has two chain idler spacers (part number 1305) to keep it properly aligned. See more info.